Views: 99 Author: Site Editor Publish Time: 2023-02-07 Origin: Site
In the use of diamond, wire saw for cutting operations before, the operator must accept the electric wire saw manufacturer's professional training. There are several points in the construction that also need to pay special attention to the construction unit. This article will talk about the use of diamond wire saw for cutting operations what are the precautions.
The following is the content list
Principle of the diamond wire sawing machine
The precautions when using a diamond wire saw machine
The precautions of site protection when using a diamond wire saw for cutting operation
Electric wire saw machine static cutting or nondestructive cutting technology also known as non-destructive cutting and demolition technology, diamond wire saw machine static cutting and demolition is an environmentally friendly, efficient, and safe new static cutting and demolition construction work method developed in recent years. Electric reinforced concrete cutting machine, referred to as diamond wire saw machine, is specially designed for cutting and separating large reinforced concrete structures. The main principle of electric wire saw machine is through the electric roller motor high-speed drive with diamond beads of steel wire, that is, diamond saw wire saw, around the object to be cut, in the role of a certain tension, high-speed grinding object to be cut, the resulting abrasive chips and heat is taken away by cooling water, the result to achieve the purpose of separating the object to be cut.
Start the electric motor of the diamond wire sawing machine, adjust the active wheel through the control panel to raise the tension, ensure the diamond bead wire is properly tensed and the cooling water is circulated. Then start the big motor, drive the main wheel to drive the diamond wire rotary cutting. The electric wire saw cutting process must closely observe the stability of the machine base, adjust the guide wheel offset at any time to ensure that the concrete wire saw cutting wire is in the same plane.
The concrete wire saw cutting process should ensure a sufficient amount of rinsing fluid to ensure the cooling of the diamond beaded wire and take away the grinding down powder chips. Remote wire saw cutting operation to achieve stable speed, stable parameters, and equipment stability.
As the diamond wire saw machine is widely used in stone mining work and large concrete cutting projects, in the process of cutting operation, the stone will be spattered around, there is a certain safety threat to the project site personnel, so the worksite protection work must be done. The following is the use of diamond wire saw for cutting operations when the site protection work needs to pay attention to the main points:
Diamond bead wire saw the cutting process, diamond wire saw movement direction of the front must be with safety fence for protection, and in a certain area set up safety signs, to prompt pedestrians do not enter the construction work area, to prevent stone splash on pedestrians cause injury.
Diamond bead wire saw machine safety protection measures must be strict, tight, otherwise broken diamond wire on the diamond bead will fly out like a bullet to hurt people. Therefore, in addition to the necessary protective measures at the scene, all thank the unrelated personnel to come and observe.
In the choice of electric concrete, wire saw cutting process type, the construction personnel should consider multiple aspects, choose the appropriate construction tools, which require the construction unit to the construction personnel for professional training.
Zhongzhi Enterprises insist on providing high-quality products, and all products are produced in strict accordance with the index. If you are interested in our products, welcome to contact us, our contact information is info@zhongzhi.biz.
