Views: 80 Author: Site Editor Publish Time: 2023-02-10 Origin: Site
Diamond wire saw, also known as diamond bead wire, is a kind of tool widely used in stone mining, cutting work, in recent years, the diamond wire saw is more and more used in emergency rescue work, in the basement, chimney, and pillar, etc. cutting and demolition as well as repair work, and the occurrence of earthquake disaster removal obstruction of the most applicable cutting construction equipment. Before using the diamond wire saw, you need to carefully read the diamond wire saw instructions for use, strictly follow the instructions for use of diamond wire saw specification to use diamond wire saw, in order to play the maximum role of diamond wire saw.
The following is the list of contents
The operation specification of diamond wire saw
The safety operation specification of diamond wire saw
When using the wire will be straight, according to 1-2 turns / m for the screwing circle, which can effectively prevent the bias grinding, and then use hydraulic pliers and pressure buckle to connect the wire saw into a closed loop. Before cutting, be sure to distinguish the direction of the wire saw use, not the opposite direction of rotation cutting. Generally speaking, the cutting direction of the diamond wire saw in the diamond wire saw of each card has a clear arrow mark placement. If there is no marked arrow indication, also can through the diamond bead wire saw itself bead to identify: bead base body long is the tail, short is the front, so the short front is the diamond bead wire saw cutting direction.
Try to avoid cutting at sharp angles in use, so as not to cause damage to the wire, and increase the support guide wheel if necessary.
Guide wheel wear will make the wire saw and guide wheel anastomosis decline, affect the wire saw line speed, and then affect the cutting efficiency, need to replace the rubber ring of the guide wheel in time.
Wire saw cutting, must be cooled, the amount of water can be adjusted according to the noise and turbidity of the cooling water when cutting. Cooling water is not the better, too much cooling water is easy to affect the wire saw of the sharpness so that the wire saw slippage. But too little cooling water will make the string bead fever, affecting the cutting life. Therefore, the amount of cooling water needs to be adjusted by the actual situation on site.
Pay attention to ensure the tensioning force, tensioning force is too small, slow cutting speed, easy to take off the wire; tensioning force is too large, wire saw wear fast, and in the connection of the risk of wire breakage.
When the wire saw is not in use should unload the tension force, save in a dry place.
All wire saw machine equipment should comply with national or related standards.
Site wire saw work surface around must-have safety isolation facilities, personal protection measures before construction.
Diamond wire saw working state, personnel must be away from the work surface at 15 meters away. Strictly forbid personnel to stay in the wire saw running direction of the tangent area; If you need to carry out on-site maintenance, must stop after the operation.
Diamond wire saw in the process of use, due to wear, impact and so on cause part of the bead loose phenomenon is normal, but in the completion of a cutting operation must check the Diamond wire saw the state, for the bead loose part should be cut down, or stop using the product.
Zhongzhi Enterprises insist on providing high-quality products, and all products are produced in strict accordance with the index. If you are interested in our products, welcome to contact us, our contact information is info@zhongzhi.biz.
